Welcome to Sony Yuhuan Hardware Tools Factory, a company set design, development, production and sales of hydraulic tools business.
English
中文版
 Products


Model:HP-20Hydraulic Rebar Cutter

◆ Uses: HP-20 Manual Integral Hydraulic Rebar Cutter is the latest development of rapid hydraulic steel shears tool for round steel, steel and other materials cut.
◆ Features: fast, hand can be cut down by 3-5, effort apply, easy to carry, suitable for field operations or at the factory for mass production.
◆ How to use: 1. Before using compressed air a few times, check the alignment or misalignment head. 2 million in cuts steel, round steel must be perpendicular to the shear plane, such as found in the shear Yuan Yuan Steel tilted to one side, you should immediately stop cut, repositioned, otherwise it will cause head injury. 3 Cut, first tighten clockwise back to the oil switch, shake the handle, hydraulic elevated piston advancing blade cut steel, finish cut, this time not to boost, to avoid damage to the blade. 4 Loosen the oil return screw heads automatic retraction. The tool is not in use, the oil must be put back to tighten the screws, and then compressed air a few times, so that a certain pressure storage tanks to prevent leakage piston parts.
◆ Packing: plastic box.
◆ Technical parameters:

Model

Output(T)

Cut range(mm)

Stroke(mm)

Size(mm)

Weight(kg)

HP-20

12

φ4-φ20

21

505X125X80

4.8