Yuhuan Xinlilai Hardware Tools Factory

Sony to Yuhuan Hardware Tools Factory
Address：Jungang Industrial Area, Chumen, Yuhuan County, Zhejiang China
Phone：15967040941
Tel：0576-87411736
Email：631287389@qq.com

Products

Model：RC-25Hydraulic Rebar Cutter

◆ Uses and characteristics: RC-25 manual hydraulic shear reinforcement is the latest development of high-precision hydraulic cutting tools for round steel, steel and other materials cut. Not stainless steel shear. Effort to apply, easy to carry, suitable for field operations or at the factory for mass production.
◆ How to use: 1. Before using compressed air a few times, check the alignment or misalignment head. 2 million in cuts steel, round steel must be perpendicular to the shear plane, such as found in the shear bar tilted to one side, you should immediately stop cut, repositioned, otherwise it will cause head injury. 3 Cut, first tighten clockwise back to the oil switch, shake the handle, hydraulic elevated piston advancing blade cut steel, finish cut, this time not to boost, to avoid damage to the blade. 4 Loosen the oil return screw heads automatic retraction. The tool is not in use, the oil must be put back to tighten the screws, and then Air looked so certain pressure storage tanks to prevent leakage piston parts.
◆ Packing: wooden box.
◆ Technical parameters:

Model	Output（T）	Cut range(mm)	Stroke（mm）	Size(mm)	Weight（kg）
RC-25	14	φ4-φ25	24	630	6.5

>> Return