◆ Name : CPC-16A manual Integral Hydraulic Rebar Cutter ◆ Uses: This product is the latest development of high-precision hydraulic cutting tools for round steel, steel and other materials cut . Not stainless steel shear . ◆ Features : saving for easy to carry, suitable for field operations or at the factory for mass production. ◆ How to use: 1 prior to use compressed air a few times, check the alignment or misalignment head . 2 In the shearing round , the round must be perpendicular to the shear plane , such as found in the shear bar tilted to one side , you should immediately stop cut, repositioned , otherwise it will cause head injury . 3 Cut , first tighten clockwise back to the oil switch, shake the handle , hydraulic elevated piston advancing blade cut steel, finish cut, this time not to boost, to avoid damage to the blade. 4 Loosen the oil return screw heads automatic retraction . The tool is not in use, the oil must be put back to tighten the screws , and then Air looked so certain pressure storage tanks to prevent leakage piston parts . ◆ Packing: plastic box. ◆ Technical parameters: |