Yuhuan Xinlilai Hardware Tools Factory

Sony to Yuhuan Hardware Tools Factory
Address：Jungang Industrial Area, Chumen, Yuhuan County, Zhejiang China
Phone：15967040941
Tel：0576-87411736
Email：631287389@qq.com

Products

Model：SYK-30Hydraulic opening device

◆ Uses and characteristics : SYK-30 is a manual hydraulic openings in 4mm below the metal plate openings hydraulic hand tools , can play a general stamping equipment can not reach cutout effect. Its simple, labor-saving , fast, machined surface smooth and clean, free space, position limits , can be used, safe and reliable. Meanwhile compact structure, appearance, easy to carry. For metallurgy , petroleum, chemical, electronics , electrical appliances , shipbuilding, machinery and other industries pipeline installation and maintenance of wires , lights , instrument switches and other openings , more suitable instrument panel has been molded plate , switch box sub-line electrical box wall opening the use hole .
◆ How to use: 1 , before the opening on the workpiece with a flashlight to make a first guide hole of 11.5mm . 2, the piston rod screwed into the holes in the cylinder , then put the washer and then put the die rod , and then rod inserted into the guide hole in the workpiece , screwed into the punch , the punch knife and processed into close with the punch , the workpiece , the die three reliable fixing . 3 , in a clockwise direction to live off the oil return valve , and then repeatedly shake the handle , so that the piston pump to work, oil pressure rise , increasing shear force between convex mold , die cut holes in the workpiece until the cut through so far. 4, according to loosen the oil return valve , the hydraulic uninstall all . 5 , unscrew the punch , remove excess material in the die , mold clean , end of the work .
◆ Custom : openings of various shapes can be customized mold .
◆ Packing: wooden box.
◆ Technical parameters:

Model	Output （T）	Stroke （mm）	Tapping Capacity（mm）			Configuration tool（mm）
			Thickness		Opening Range（mm）
			Stainless steel	Iron plate
SYK-30	30	29	≤2	≤4	φ60- φ114

>> Return

Products

Hydraulic punching machine
Hydraulic bending machine
Hydraulic cutting machine scheduling
Multi-bus processing machine
Ping Li bending machine (Combo)
Hydraulic crimping machine
Angle Cutting Machine
Hydraulic pump
- Gasoline engine high pressure pump
- Electric hydraulic pump
- Hydraulic hand pump
- Hydraulic Foot Pump
- High-power pump

Hydraulic crimping tool
Overall crimping pliers
Wire rope shears
Split hydraulic crimping pliers
Hydraulic opening device
- Bus embossing machine
- Hydraulic Rebar Cutter
- Wire rope shears
Electric Rebar Cutter
Electric steel bending machine
Hydraulic Puller
- Split hydraulic Rama
- Integral hydraulic Rama

Hydraulic jacks
- Ultra-thin hydraulic jacks
- Multi-section hydraulic jacks
- RSC hydraulic jacks
- Hollow plunger hydraulic jack
- Lock nut jack
- Double-acting hydraulic jack
- Claw jack
- Large-tonnage hydraulic jacks
Hydraulic pipe bender
Hydraulic nut splitters
Cable Cutter
- Split Hydraulic Cable Cutter

- Integral hydraulic cable cutter
- Hand Cable Cutter
Flange separation dilator
- Flange dilator
- Flange separation
Punch tool
Cable pulley
Tight line card line
Test pump
Clamp
Cable Stripper
Hydraulic Tools Accessories