◆ Uses and characteristics : MH-10 manual mechanical punching machine is mainly used for power sector cross- 10KV distribution network once , tower, power plants, substations copper and aluminum row, equipment, clamp , angle, channel , flat iron , red M10 , M12, M16, M18, M20 screw holes . Because the machine does not need power , it is particularly suitable for outdoor, aerial and underwater operations. Punching accurate positioning. No dry sound , no chips , safe and clean operation . Easy to carry. ◆ Accessories: random with mold Φ11, Φ13, Φ17, Φ19, Φ21 five pay . The rest of the mold to be customized. ◆ Technical parameters : 1. Output : 20T. 2. Maximum punching thickness: copper, aluminum : 12mm; iron : 10mm. 3. Throat depth : 40mm 4. Weight : 16kg. (5) Dimensions : 400x240x160 ◆ Operation: 1 . choose the desired aperture matching punch and die , mounted to the machine model head . 2. workpiece into the die opening, alignment groove, rotating die clamping workpieces. 3. shaking hand, punch down, punching . ◆ Note: 1. preflight check whether the punch and the die package , otherwise it will damage the host . 2. before punching die must first compression artifacts . 3. during operation , such as abnormal failure, should immediately stop punching until after troubleshooting for openings . 4. Screw, nut should always add oil. ◆ Packing : wooden box |