Hydraulic Rebar Cutter - 冲孔机_千斤顶工具_液压开孔器-玉环市新力来五金工具厂

Welcome to Sony Yuhuan Hardware Tools Factory, a company set design, development, production and sales of hydraulic tools business.

WL5-30T系列卧式拉床
LZL5-C立式自动拉床
LZL10-C立式自动拉床
数控台钻系列
转子系列

TEL:0576-87569700
FAX:0576-87564532
Mobile:13967651078
ADD:Rd. 7, Kanmen Premise, Yuhuan County, Zhejiang

Hydraulic Rebar Cutter

Location：Home > Hydraulic Rebar Cutter

◆ Uses: HP-20 Manual Integral Hydraulic Rebar Cutter is the latest development of rapid hydraulic steel shears tool for round steel, steel and other materials cut.
◆ Features: fast, hand can be cut down by 3-5, effort apply, easy to carry, suitable for field operations or at the factory for mass production.
◆ How to use: 1. Before using compressed air a few times, check the alignment or misalignment head. 2 million in cuts steel, round steel must be perpendicular to the shear plane, such as found in the shear Yuan Yuan Steel tilted to one side, you should immediately stop cut, repositioned, otherwise it will cause head injury. 3 Cut, first tighten clockwise back to the oil switch, shake the handle, hydraulic elevated piston advancing blade cut steel, finish cut, this time not to boost, to avoid damage to the blade. 4 Loosen the oil return screw heads automatic retraction. The tool is not in use, the oil must be put back to tighten the screws, and then compressed air a few times, so that a certain pressure storage tanks to prevent leakage piston parts.
◆ Packing: plastic box.
◆ Technical parameters:

Model	Output（T）	Cut range(mm)	Stroke（mm）	Size(mm)	Weight（kg）
HP-20	12	φ4-φ20	21	505X125X80	4.8

Total:11Records Page:1/11 PageSize:1Records 1 [2][3][4][5][6] : :

Products

Hydraulic punching machine
Hydraulic bending machine
Hydraulic cutting machine scheduling
Multi-bus processing machine
Ping Li bending machine (Combo)
Hydraulic crimping machine
Angle Cutting Machine
Hydraulic pump
- Gasoline engine high pressure pump
- Electric hydraulic pump
- Hydraulic hand pump
- Hydraulic Foot Pump
- High-power pump

Hydraulic crimping tool
Overall crimping pliers
Wire rope shears
Split hydraulic crimping pliers
Hydraulic opening device
- Bus embossing machine
- Hydraulic Rebar Cutter
- Wire rope shears
Electric Rebar Cutter
Electric steel bending machine
Hydraulic Puller
- Split hydraulic Rama
- Integral hydraulic Rama

Hydraulic jacks
- Ultra-thin hydraulic jacks
- Multi-section hydraulic jacks
- RSC hydraulic jacks
- Hollow plunger hydraulic jack
- Lock nut jack
- Double-acting hydraulic jack
- Claw jack
- Large-tonnage hydraulic jacks
Hydraulic pipe bender
Hydraulic nut splitters
Cable Cutter
- Split Hydraulic Cable Cutter

- Integral hydraulic cable cutter
- Hand Cable Cutter
Flange separation dilator
- Flange dilator
- Flange separation
Punch tool
Cable pulley
Tight line card line
Test pump
Clamp
Cable Stripper
Hydraulic Tools Accessories