Multi-bus processing machine - 冲孔机_千斤顶工具_液压开孔器-玉环市新力来五金工具厂

Welcome to Sony Yuhuan Hardware Tools Factory, a company set design, development, production and sales of hydraulic tools business.

WL5-30T系列卧式拉床
LZL5-C立式自动拉床
LZL10-C立式自动拉床
数控台钻系列
转子系列

TEL:0576-87569700
FAX:0576-87564532
Mobile:13967651078
ADD:Rd. 7, Kanmen Premise, Yuhuan County, Zhejiang

Multi-bus processing machine

Location：Home > Multi-bus processing machine

◆ Product Description : VHB-402 Quad bus processing machine is the introduction of foreign advanced technology, combined with years of experience in design and development of an efficient and versatile machine bus . Widely used in electric power, telecommunications, railways, petrochemicals , shipping and other industries, suitable for transmission and distribution in a large workshop and site construction work , as well as power distribution cabinets and switchgear and other electrical factory use . For busbar cutting, punching , bending , vertical bending four bit processing , easy to operate , saving time , high production efficiency .
◆ Main structure: This product is made with solenoid valve hydraulic electric pump , CH-70 punching machine , CWC-150 cut row machine , CB-125D Combo flat, vertical bending row machine, workbench , switch , etc. components . 1 electric hydraulic pump : single phase , 220V, rated working pressure : 70MPa.2.CH-70 punching machine : Output 35T, Throat depth : 110mm, maximum thickness of copper processing 12mm, standard with mold : Φ10.5, Φ13.8, Φ17.5, Φ20.5 four pay , another can be customized party mode and a long strip of the mold. 3.CWC-150 cut row machine : 15T, processing capacity : copper 150mm wide X12mm thick. 4.CB-125D Combo flat, vertical bending machine : Capacity : 125mm Width X12.5 mm thick , angle 0-90 degrees , with a die set .
◆ Usage: First, the product is ready to be processed , installed the appropriate die each station , open the hydraulic electric pump, the workpiece into the mold cavity , rotating four -position switch to specify a station work , turn to the next station after the completion of the work .
◆ flow table size : 850mmX750mmX1100mm
◆ Weight : 220kg
◆ Packing : wooden box

Total:6Records Page:1/6 PageSize:1Records 1 [2][3][4][5][6] :

Products

Hydraulic punching machine
Hydraulic bending machine
Hydraulic cutting machine scheduling
Multi-bus processing machine
Ping Li bending machine (Combo)
Hydraulic crimping machine
Angle Cutting Machine
Hydraulic pump
- Gasoline engine high pressure pump
- Electric hydraulic pump
- Hydraulic hand pump
- Hydraulic Foot Pump
- High-power pump

Hydraulic crimping tool
Overall crimping pliers
Wire rope shears
Split hydraulic crimping pliers
Hydraulic opening device
- Bus embossing machine
- Hydraulic Rebar Cutter
- Wire rope shears
Electric Rebar Cutter
Electric steel bending machine
Hydraulic Puller
- Split hydraulic Rama
- Integral hydraulic Rama

Hydraulic jacks
- Ultra-thin hydraulic jacks
- Multi-section hydraulic jacks
- RSC hydraulic jacks
- Hollow plunger hydraulic jack
- Lock nut jack
- Double-acting hydraulic jack
- Claw jack
- Large-tonnage hydraulic jacks
Hydraulic pipe bender
Hydraulic nut splitters
Cable Cutter
- Split Hydraulic Cable Cutter

- Integral hydraulic cable cutter
- Hand Cable Cutter
Flange separation dilator
- Flange dilator
- Flange separation
Punch tool
Cable pulley
Tight line card line
Test pump
Clamp
Cable Stripper
Hydraulic Tools Accessories